Laval Underground Surveys Logo
Phone-alt Envelope Instagram Youtube Facebook
View Products
Laval Underground Surveys Logo
View Products
Laval Underground Surveys Logo
View Products

Model 40 Cam Power Winch

Model 40 Cam Power Winch

Driven by variable speed, high torque hydraulic (or optional electric) motor with 4,000 feet (1,219.2 m) of cable length. Features hand operated brake with eight square inches braking surface, and a dog clutch which allows winch drum to free spin.
Request a Quote
Model 40 Winch Includes Level Wind for Borehole or Water Well Cameras
Model 40 Winch Includes Level Wind for Borehole or Water Well Cameras
Model 40 Winch with Electric Motor Option
Model 40 Winch with Electric Motor Option

Overview

The winch features:

  • Adjustable cable level wind
  • Mechanical counter
  • Mechanical footage read-out at winch
  • Video depth encoder, displaying camera position at all times on TV monitor
  • Variable speed control
  • Choice of hydraulic or electric power sources
  • Clutch Mechanism
  • Emergency Disc Brake
Request a Quote

Model 40 Winch Tech Specs

Download/Print PDF

Model 40 Power Winch for Borehole and Water Wells of Depths up to 4,000 Feet
Model 40 Power Winch for Borehole and Water Wells of Depths up to 4,000 Feet

Model 40 Winch Specifications

Application: Designed for ¼-inch steel-armored, single conductor coaxial video cable
Cable Capacity: 3,000 to 4,000 feet (914.4 to 1,219.2 m)
Drive Motor (Hydraulic Models): Variable, reversible drum speed (0-20 rpm) with nearly constant torque. (Note: Hydraulic powered winches require the installation of a hydraulic fluid source and directional control, sold separately.)
Drive Motor (Electric Models): 90 or 180 volt, variable speed DC motor reversible controller, operation from 115 VAC; right angle 30: 1 gear box designed for a maximum thrust torque of 880 load pounds
Power Source (Electric): 120/240 VAC, 50/60 Hz or AC generator
Clutch: Manual level type (dog clutch) to allow drive mechanism to be disengaged, providing free spooling of cable
Brake: Mechanical caliper disc; 8 sq. in of total braking surface; high grade friction material
Footage Counter Mechanism: Includes electronic encoder and mechanical counter on winch
Level Wind: Automatic diamond screw mechanism with adjustable calibration
Slip Ring Assembly: Low noise slip rings permitting signal and DC power transmission over single-conductor coaxial cable
Winch Speed & Direction Control: 3-way directional valve (hydraulic motor) or variable speed controller (electric motor)
Dimensions: height 28 inches (71.1 cm), width 30 inches (76.2 cm), length 28 inches (71.1 cm)
Weight (without cable): 385 lbs (174.6 kg)

Reviews

What Customers Say

The camera is excellent and it makes a night and day difference in our business.

Gary Shawver

Shawver Well Company

I used to borrow a friendly competitor’s camera.  He had a small one with a hand reel and a tripod made of PVC.  It worked for me at times, but the R-cam 1000 is heads and shoulders above that.

Scott Miller

Northern Virginia Drilling

I hoped we would use our new R-CAM 1000 at least 1 time per month... but we're averaging closer to 10. Plus, I don't have to subcontract the work out to my competition anymore, and I'm picking up a bunch of additional well rehab work.

Al Boone

Boone Water Systems, Inc

Frequently Asked Questions

The downhole facing SC-166 is suitable for boreholes up to 10 inches in diameter. The R-CAM dual view camera can view boreholes up to 16 inches in diameter. The DC5150 is suitable for borehole diameters up to 30 inches in diameter. Please note, visibility downhole will be impacted by the clarity of the fluid and the available light.

Some manufacturers will claim that a wide-angle down-view lens can provide just as much viewing area as a dedicated side-view camera module. This is simply not the case. To achieve the clearest, most detailed view of the side of the borehole you will need a dedicated side-view camera. The R-CAM dual view camera and DC5150 come equipped with 360-degree side-view and dedicated down-view cameras.
When you view the system as a whole, the cable is one of the least expensive components at the time of purchase, yet one of the most difficult to upgrade at a later time. Our recommendation is to equip your system with more cable than you initially think you’ll need. A camera system will be in service for many years, and while you may only survey wells that are 500 ft. today, in seven years you may be surveying wells that are 600-700 ft. deep. Additionally, the cable will be removed periodically when replacing the cable head as a part of normal maintenance. Having additional cable is a great way to future-proof your system and ensure your peace of mind.
While a real-time video survey is preferable to having no down-hole data at all, the real value of a down-hole survey is the video data is generated and can be analyzed and reviewed at a later time. With this in mind, nearly all of our systems come equipped with state-of-the-art DVR’s that easily capture and store your video data. These videos are stored on an included 16 GB thumb drive for easy sharing with customers.
Having your depth displayed on-screen in real-time is a critical data point when conducting an underground survey. Without your depth count on screen, it is very easy to become disoriented down-hole and miss critical bits of information, like a break in the well casing. Nearly all of our down-hole camera systems are equipped with a highly accurate digital encoder, ensuring you know the exact depth of your camera while conducting a survey.

Every camera system will eventually require a repair to the cable head, the point at which the cable and camera physically connect. Over time, the internal connections within the cable head can be strained to the point where they disconnect and cause interference or a complete loss of the video signal. To expedite the repair process, we have cable head repair kits available for both portable systems and large vehicle-based systems.

Conducting surveys with the included centralizers and available lens shield accessory is the best way to ensure that the camera head remains protected downhole. When not in use, store the camera head in an area where it will be safe from unintentional drops or damage. If your camera system is damaged, we offer full repair services at our headquarters in Fresno, California.

Tagged
Request a Quote
Model 40 Cam Power Winch
Quote Request
Address *
Address
City
State/Province
Zip/Postal
Country
Laval Underground Surveys Logo

Laval Underground Surveys pioneered the concept of well camera inspection more than 70 years ago.

Instagram Facebook Youtube Twitter

Navigation

Contact Us

  • 2476 N Bundy Dr,
    Fresno, CA 93727
    USA
  • (559) 251-1396
  • info@lavalunderground.com
© Laval Underground. All Rights Reserved | Privacy Policy
Request a Quote
Model 40 Cam Power Winch
Quote Request Popup
Address *
Address
City
State/Province
Zip/Postal
Country
  • Give us a Call: (559) 251-1396